CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Interface in a rotating domain (http://www.cfd-online.com/Forums/cfx/134479-interface-rotating-domain.html)

error404 April 30, 2014 05:38

Interface in a rotating domain
 
1 Attachment(s)
Hey CFDlers,

im simulating a turbine. Ive modelled the half of the turbine. Which interface is to choose in a stationary simulation between the blades for example in the rotor. Is there to choose "frozen rotor" or "none". There is no relative movement between the blades of the domain. But there is a movement between rotor and stator.

The red colored is the rotating domain and the blue colored is the "interface".

The rotor is shown on the picture attached.

Attachment 30508


Thx Simon

ghorrocks April 30, 2014 08:02

Hav eyou done the tutorials which come with CFX on rotating machinery? They explain how to do this sort of stuff.

error404 May 16, 2014 03:08

3 Attachment(s)
Thank you for your support.:)

Is it "OK" for CFX, when the surfaces of the interfaces are really looking different?

Attachment 30903
Attachment 30905
Attachment 30904


All times are GMT -4. The time now is 01:12.