CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Torque in local Coordinate Frame

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By Opaque

Reply
 
LinkBack Thread Tools Display Modes
Old   July 10, 2014, 13:08
Default Torque in local Coordinate Frame
  #1
New Member
 
Cedric
Join Date: Jul 2014
Posts: 9
Rep Power: 4
Spinassien is on a distinguished road
In CFX-Post i used the calculator to calculate torque of a Body about the global coordinate frame - no problem. Now i try to calculate Torque about a local coordinate frame (defined by myself in CFX-Pre (meshtool) ) in a steady state simulation. After solving i startet CFX-Post went to the calculator tab and the only c-frame in the dropdown-menu is the global. What am i doing wrong?
Spinassien is offline   Reply With Quote

Old   July 10, 2014, 13:16
Default
  #2
Senior Member
 
Join Date: Jun 2009
Posts: 573
Rep Power: 13
Opaque is on a distinguished road
Coordinate frames created in CFX-Pre are not passed down to CFD-Post.

You must create the coordinate frame in CFD-Post to be used in the calculator.
Spinassien likes this.
Opaque is offline   Reply With Quote

Old   July 10, 2014, 13:24
Default
  #3
New Member
 
Cedric
Join Date: Jul 2014
Posts: 9
Rep Power: 4
Spinassien is on a distinguished road
Thank you , I will try it tomorrow.
Spinassien is offline   Reply With Quote

Old   July 11, 2014, 10:34
Default
  #4
New Member
 
Cedric
Join Date: Jul 2014
Posts: 9
Rep Power: 4
Spinassien is on a distinguished road
it worked well, thank you.
Spinassien is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reading data from local coordinate frame marcolovatto CFX 0 October 17, 2012 16:05
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 04:03
BlockMeshmergePatchPairs hjasak OpenFOAM Native Meshers: blockMesh 11 August 15, 2008 07:36
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 02:58
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07


All times are GMT -4. The time now is 09:02.