CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

terrible imbalance of energy equation for a rotating periodic domain

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 27, 2014, 08:19
Question terrible imbalance of energy equation for a rotating periodic domain
  #1
liz
New Member
 
yuan
Join Date: Nov 2014
Posts: 4
Rep Power: 11
liz is on a distinguished road
Hi,,
I'm trying to model heat transfer of a rotating periodic domain, but settings for opening boundary condition confuse me. When I set opening condition's frame type stationary, terrible imbalance of energy equation happens(larger than 1 sometimes). But if I change frame type to rotation, imbalance of energy equation reduces to zero but convergence of momentum becomes difficult. Do you know the causes?
Model details: k-epsilon, scable wall function, thermal energy, rotating periodic interfaces;walls with fixed temperature, stationary relative to frame type; opening boundary with 0 relative pa, fixed open temperature
Any discussion is welcomed.
liz is offline   Reply With Quote

Old   November 27, 2014, 10:40
Default
  #2
Senior Member
 
Join Date: Jun 2009
Posts: 1,788
Rep Power: 31
Opaque will become famous soon enough
Not sure if it matters for your case, but rotating domains should always be run using Total Energy unless you already know that the angular speed will not make much difference in the solution, i.e. it could have been run as stationary anyways.

You are using opening instead of inlet ? Are you expecting recirculating flow at the boundary ? If you do not expect such flow, you are better off running as an inlet directly.
Opaque is offline   Reply With Quote

Old   November 27, 2014, 21:39
Default
  #3
liz
New Member
 
yuan
Join Date: Nov 2014
Posts: 4
Rep Power: 11
liz is on a distinguished road
Quote:
Originally Posted by Opaque View Post
Not sure if it matters for your case, but rotating domains should always be run using Total Energy unless you already know that the angular speed will not make much difference in the solution, i.e. it could have been run as stationary anyways.



You are using opening instead of inlet ? Are you expecting recirculating flow at the boundary ? If you do not expect such flow, you are better off running as an inlet directly.

Thanks for your reply. It's a pity that total energy doesn't give a better result.
ImageUploadedByCFD Online Forum1417138323.321329.jpg
This problem is about a vented disc, rotating with pumping effect, so inlet velocity is not very clear. The model is similar to attachment.And the vented part may produce mesh motion in stationary frame. Rotating frame is needed.

Model looks like this. ATTACH]35586[/ATTACH]

Do you think opening boundary needed to be changed?
Attached Images
File Type: jpg ImageUploadedByCFD Online Forum1417138470.478592.jpg (19.5 KB, 16 views)
liz is offline   Reply With Quote

Old   November 27, 2014, 21:55
Default
  #4
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Have you done the standard stuff when you have convergence difficulties? This FAQ discusses it: http://www.cfd-online.com/Wiki/Ansys...gence_criteria
ghorrocks is offline   Reply With Quote

Old   November 28, 2014, 02:50
Default
  #5
liz
New Member
 
yuan
Join Date: Nov 2014
Posts: 4
Rep Power: 11
liz is on a distinguished road
Quote:
Originally Posted by ghorrocks View Post
Have you done the standard stuff when you have convergence difficulties? This FAQ discusses it: http://www.cfd-online.com/Wiki/Ansys...gence_criteria

Hi,
Almost every method proposed in the link page has been tried,but it doesn't work. Something important may be ignored, can you give me some advices? or could you read the .cfx file?
Thank you so much!
liz is offline   Reply With Quote

Old   November 30, 2014, 07:28
Default
  #6
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
What do your residual histories look like?

Have you increased the time step size and run it for a bit longer? It might not be converged yet.
ghorrocks is offline   Reply With Quote

Old   December 1, 2014, 23:09
Default terrible imbalance of energy equation for a rotating periodic domain
  #7
liz
New Member
 
yuan
Join Date: Nov 2014
Posts: 4
Rep Power: 11
liz is on a distinguished road
Quote:
Originally Posted by ghorrocks View Post
What do your residual histories look like?

Have you increased the time step size and run it for a bit longer? It might not be converged yet.

Yeah, you're right. Set MAX residual criteria as 1e-4, and with a better initialization, I got energy balance. To accelerate convergence, a larger local timescale factor(=50) was set.
This problem has been worked out.
ImageUploadedByCFD Online Forum1417489337.261514.jpgImageUploadedByCFD Online Forum1417489659.185954.jpgImageUploadedByCFD Online Forum1417489673.290496.jpgImageUploadedByCFD Online Forum1417489683.594484.jpg

Thanks so much for your kind help!
liz is offline   Reply With Quote

Reply

Tags
imbalance, opening boundary

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with energy imbalance Roland R CFX 11 November 8, 2019 04:47
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
question about governing equation in CFX using rotating/non rotating reference frame rystokes CFX 0 January 12, 2010 07:14
transient simulation of a rotating rectangle icesniffer CFX 1 August 8, 2009 08:25
Why FVM for high-Re flows? Zhong Lei Main CFD Forum 23 May 14, 1999 14:22


All times are GMT -4. The time now is 18:54.