Multiphase flow question

markos9149 · January 20, 2015, 15:45

I am doing a simulation of bubbly two phase flow in CFX the model used is k epsilon I activate all interfacial terms on CFX
The inlet conditions are (Vg = 0.077; Vl = 1.36) the pipe is 2.1m length and 60mm diameter my goal is to find wall peak in the gas volume fraction distribution
I realized many simulations I did not find this peak
Please how can help me

ghorrocks · January 20, 2015, 16:30

First of all: Please start a new thread for a new question. Do not hijack other people's threads. I have moved this to a new thread for you.

On your question: You have not provided much information to allow me to make a useful comment. See FAQ: http://www.cfd-online.com/Wiki/Ansys...ible_answer.3F

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiphase Flow	Pavlos	FLUENT	0	August 8, 2011 08:43
Multiphase flow and convergence issues	Erik	FLUENT	1	July 13, 2009 17:08
multiphase flow, aeration	Ellie	CFX	3	January 15, 2009 17:33
Multiphase flow with mass transfer?	A. Ataki	FLUENT	1	November 10, 2003 04:46
Multiphase flow modeling	Paul	CFX	2	August 11, 2003 09:41

January 20, 2015, 16:30		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	First of all: Please start a new thread for a new question. Do not hijack other people's threads. I have moved this to a new thread for you. On your question: You have not provided much information to allow me to make a useful comment. See FAQ: http://www.cfd-online.com/Wiki/Ansys...ible_answer.3F