Temperature increment at wall in compressible flow

Yogini · April 1, 2015, 09:11

Hello,

I am simulating 3D steam turbine stator in cfx using multiphase-droplet condensation model. I have a problem regarding to temperature field. In simulation, the flow temperature on the blade wall increases (reached to 1600 K).
I have chosen no slip adiabatic BC for walls. I included viscous work term in heat transfer model option.

Can anyone suggest what is the reason of temperature increment at walls ?

Thank you in advance.

BR,
Yogini

ghorrocks · April 1, 2015, 17:52

A vague question, so I refer you to the FAQ on accuracy: http://www.cfd-online.com/Wiki/Ansys..._inaccurate.3F

Here's another FAQ on how to ask a better question: http://www.cfd-online.com/Wiki/Ansys...ible_answer.3F

April 1, 2015, 09:11	Temperature increment at wall in compressible flow	#1
Yogini New Member Yogini Patel Join Date: Jan 2010 Location: Finland Posts: 15 Rep Power: 16	Hello, I am simulating 3D steam turbine stator in cfx using multiphase-droplet condensation model. I have a problem regarding to temperature field. In simulation, the flow temperature on the blade wall increases (reached to 1600 K). I have chosen no slip adiabatic BC for walls. I included viscous work term in heat transfer model option. Can anyone suggest what is the reason of temperature increment at walls ? Thank you in advance. BR, Yogini Last edited by Yogini; April 2, 2015 at 04:29.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Natural convection in a closed domain STILL NEEDING help!	Yr0gErG	FLUENT	4	December 2, 2019 00:04
Temperature at a velocity/mass flow outlet	saisanthoshm88	CFX	1	July 8, 2014 18:35
Is wall ajacent temperature equal to conservative temperature of the wall?	shenying0710	CFX	8	January 4, 2013 04:03
Heat Transfer Coefficient in Compressible Flow 3D turbine cascade	Karkoura	CFX	0	March 10, 2011 15:35
what the result is negatif pressure at inlet	chong chee nan	FLUENT	0	December 29, 2001 05:13

April 1, 2015, 17:52		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,701 Rep Power: 143	A vague question, so I refer you to the FAQ on accuracy: http://www.cfd-online.com/Wiki/Ansys..._inaccurate.3F Here's another FAQ on how to ask a better question: http://www.cfd-online.com/Wiki/Ansys...ible_answer.3F