CFD Online URL
[Sponsors]
Home > Forums > CFX

source terms and mixing in CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 20, 2000, 19:36
Default source terms and mixing in CFX
  #1
Timothy Pau
Guest
 
Posts: n/a
I am currently using CFX, the problem is that I have a cylinderical vessel with two inlets (say inlet1 and inlet2) and an outlet. My supervisor wants me to find the mean residence time of the vessel, and the way he does it in Fluent is that when the fluid from inlet1 carrying species 1 enters the vessel it transforms itself into species 3 at a constant rate, inlet2 is carrying species2. So that the longer the time species1 stays in the reactor the more concentration of species3 it is going to produce. Species 2 is inert. So you end up so a plot of mass fractions of each of the species, in a sense showing areas of the vessel where species1 (from inlet1) is stagnant and where it is not mixing well.

apparently I am meant to use some source terms but being new to CFX I am not sure how the subroutine works or how I am meant to alter it. I was wondering if your expertise could shed somelight on my situation, I think the subroutine is called USRSRC

I would greatly appreciate any help
  Reply With Quote

Old   July 27, 2000, 23:55
Default Re: source terms and mixing in CFX
  #2
Hyun S. Lee
Guest
 
Posts: n/a
Dear Timothy Pau

Please check out the following CFX user subroutine archieve which contains several useful user fortran files including "USRSRC.f". Click the icon!!



Plus, some lecture material written by Simon Lo would help your understanding. Please contact CFX agent.

Regards, Hyun S. Lee
  Reply With Quote

Old   August 8, 2000, 12:32
Default Re: source terms and mixing in CFX
  #3
Yi
Guest
 
Posts: n/a
hi,

I am trying to simulate a flow field with multiple gas injections inside the domain. More specifically, primary gas is injected from bottom INLET; secondary gas is injected at several points in the flow domain.

Is it possible to only use the commond lines to implement the simulation using CFX4.3?

Thanks in advance.

Yi
  Reply With Quote

Old   August 9, 2000, 07:11
Default Re: source terms and mixing in CFX
  #4
Yi
Guest
 
Posts: n/a
Forget this post. I solved it aleady.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fogging / Mixing Problem ADI FLUENT 0 October 26, 2009 21:30
Air-EGR mixing Anshuman FLUENT 0 February 8, 2006 06:45
Wall reflection terms Astrid FLUENT 0 March 16, 2002 17:31
source terms and mixing Timothy Pau Main CFD Forum 1 July 21, 2000 00:40
Energy balance in mixing vessel Gjvdg Main CFD Forum 6 June 20, 2000 10:25


All times are GMT -4. The time now is 20:55.