CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Patch changing along simulation.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 1, 2000, 12:26
Default Patch changing along simulation.
  #1
Fabio
Guest
 
Posts: n/a
Hi everyone,

Is there a way to change the patches along the simulation using CFX? Im using the 4.3 version and Im intending to manipulate these patches, say replace a wall with a pressure boundary. Ive tried USRTPL, but this routine only changes it in the first iteration, not during the simulation.

Any suggestion Id be appreciate.

Regards,

Fabio.
  Reply With Quote

Old   December 1, 2000, 16:50
Default Re: Patch changing along simulation.
  #2
Ch.Jung
Guest
 
Posts: n/a
Hi Fabio,

I guess you have to stop your simulation, change the patch in your *geo/*fc File and restart the job with the saved *dmp File. If you has to do this several times during your run, write a (Perl or Python or...) script for this task.

Chris
  Reply With Quote

Old   December 4, 2000, 06:31
Default Re: Patch changing along simulation.
  #3
Fabio Kasper
Guest
 
Posts: n/a
Hi Ch.Jung

Thanks very much for your suggestion, but it concerns me the patch changing in a batch simulation, i.e all in one, not dumping files.

Regards, Fabio
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CGNS converters available mbeaudoin OpenFOAM Meshing & Mesh Conversion 125 July 1, 2015 21:09
Cyclic BC's: Possible face ordering problem? (Channel flow) sega OpenFOAM Native Meshers: blockMesh 3 September 28, 2010 12:46
CreatePatch chris1980 OpenFOAM Mesh Utilities 7 February 12, 2009 14:27
Create boundary fabrizio Open Source Meshers: Gmsh, Netgen, CGNS, ... 1 October 26, 2008 15:12
phase changing simulation David Liu Main CFD Forum 3 October 25, 2004 01:43


All times are GMT -4. The time now is 00:20.