CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Roughness and Turbulent multiplier

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 16, 2001, 23:36
Default Roughness and Turbulent multiplier
  #1
Sumon
Guest
 
Posts: n/a
Hi everyone

There is a problem about turbulent multiplier in USRWTM. In USRWTM user must set TMULT. I want to know how will I set this? In the solver manual(CFX 4.2) ROUGHNESS is set 1.0 (as a default) under the subcommand WALL BOUNDARIES. Could anyone tell me about this? Actually if it is the roughness factor, then its ok, but if it is the roughness height, I want to know the its unit.

Any suggestion about this will be appreciated.

Thanks

Sumon
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Laminar flow and wall roughness junbbung FLUENT 2 November 26, 2022 22:22
Roughness in turbulent pipe flow 1000sh Main CFD Forum 3 April 11, 2010 10:00
Roughness in Turbulent Pipe Flow 1000sh FLUENT 2 April 11, 2010 06:55
wall roughness with SST turbulence model in CFX10 Vincent CFX 7 September 10, 2007 17:49
FRICTION FACTOR TURBULENT PIPE and ROUGHNESS beginner FLUENT 1 July 30, 2007 16:16


All times are GMT -4. The time now is 05:30.