CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   PARTICLE TRANSPORT MODEL (https://www.cfd-online.com/Forums/cfx/18586-particle-transport-model.html)

sanjib das sharma July 27, 2001 03:53

PARTICLE TRANSPORT MODEL
 
Hi,I am simulating massless praticle transport in a pipe.In the example,the number of particle simulations is given,but from the PARTICLE TRANSPORT MODEL>>MODEL CHARACTERISTICS>>ACTIVE KEY WORDS>>SHOW ALL...I cannot get this into the command file.So a continuous error message is coming.Can anyone help out of this. Regards, Sanjib.

Herve July 27, 2001 05:04

Re: PARTICLE TRANSPORT MODEL
 
You MUST set up >>OPTIONS >>PARTICLE TRANSPORT otherwise the PTM options in >>MODEL DATA won't appear! (p. 127 in the old 4.2 paper manual or p. 3-280 in the latest 4.4 on-line manual)

sanjib das sharma July 27, 2001 06:14

Re: PARTICLE TRANSPORT MODEL
 
Hi Herve, I think you missed the problem.I have got into the PARTICLE TRANSPORT MODEL>>MODEL CHARACTERISTICS>>ACTIVE KEY WORDS>>SHOW ALL section.I have put the Number of Iterations button on,but it is not coming into the MODEL CHARACTERISTICS section.Is there any other way to set this variable. Regards, Sanjib.

Jan Rusås July 27, 2001 09:01

Re: PARTICLE TRANSPORT MODEL
 
Have you activated advanced under utilities?-when advanced is activated you should get access to all the options.

You could also leave the enviroment, and use any editor and write what you want manually in the .fc file. In many cases it is much easier to use an editor for doing changes.

Jan

Herve July 27, 2001 09:14

Re: PARTICLE TRANSPORT MODEL
 
Sorry.

I agree with Jan. I too prefer writting the cmd files directly.

sanjib das sharma July 28, 2001 07:23

Re: PARTICLE TRANSPORT MODEL
 
Thanks Jan.Can you please send me an example in my hotmail account.I have tried to include one but could not do it?Thanks for your patience. Sanjib.


All times are GMT -4. The time now is 19:29.