CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

explosion using laminar flame model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 3, 2001, 11:08
Default explosion using laminar flame model
  #1
imburse
Guest
 
Posts: n/a
Hi, everybody. I am working on an explosion project. The explosion occurs in a vessel filled with premixed fuel-air gas mixture, and is triggered by an electrical spark. I am using the laminar flame model provided in CFX 4.3 to simulate the deflagration. My question is how I can go about to determine the parameters needed in laminar flame model in terms of different fuels. These parameters include quenching limit, flame width, ignition threshold, dtbmax, ignition length, ignition duraiton, etc.

Thirsty for hints. Thanks in advance.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
about Subgrid-scale model impecca OpenFOAM Running, Solving & CFD 4 December 20, 2013 11:36
How to model laminar zones? sachin OpenFOAM 1 February 12, 2011 10:07
Laminar model - Need some urgent help amoolraina FLUENT 0 September 5, 2010 01:15
Laminar flow in species transport model? Neha Rao FLUENT 7 February 25, 2006 03:23
Looking for Laminar Flame Codes John Main CFD Forum 0 September 17, 2005 20:13


All times are GMT -4. The time now is 05:20.