|
[Sponsors] |
December 13, 2001, 01:38 |
Printing plots in POWERMESH?
|
#1 |
Guest
Posts: n/a
|
Hi everyone,
I use ICEM POWERMESH software for grid generation. It has geometry creation module DDN and grid generation module PCUBE. I wish to create picture files for the plots of model generated in DDN. The plot file should also be in the format acceptable in MS-PowerPoint. How to create? Dr. A.S. PANWALKAR. |
|
December 18, 2001, 10:44 |
Re: Printing plots in POWERMESH?
|
#2 |
Guest
Posts: n/a
|
I've made many pictures of DDN and P-Cube over the years. I've always done it using the 'quick and dirty' method of taking screen shots. The mechanism differs depending on the hardware platform. I've used "snapshot" on SGI. For PC's, the quickest mechanism is to use Alt-Prnt Scrn (with your focus in the DDN or P-Cube window), and then go to an imaging program (MS Paint is one example) and use Ctrl-V to paste the image for further editing. You can also paste directly into PPT using Ctrl-V if you don't need to edit the image.
|
|
December 19, 2001, 02:51 |
Re: Printing plots in POWERMESH?
|
#3 |
Guest
Posts: n/a
|
Thank you Mr. Kaiser for your response to my query. You have aptly termed the method as 'quick and dirty'. I hope Powermesh supplier also see this message and comment on it. We have also resorted to use the same method.
Dr. Panwalkar |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cp Plots | Saj | STAR-CCM+ | 1 | October 12, 2010 09:50 |
Smooth plots of external data | samu | Siemens | 2 | May 21, 2006 13:08 |
drawing of contour plots | chinthakindi | Main CFD Forum | 1 | April 27, 2004 04:33 |
Printing plots to file in POST | gilberto | CFX | 3 | December 13, 2001 04:51 |
Printing gray-scales plots from CFX-View, Visualize | Luis R. Rojas-Solorzano | CFX | 2 | February 14, 2000 11:11 |