HEXA: 2D grids on Tascflow.

February 18, 2002, 15:05

Hi everyone,
I was wonder if there's a way to create grids for Tascflow starting from 2-D blocks created in CFX-HEXA. In Hexa I can create 2-D grids for CFX-4 and CFX-5, but I can't do it for Tascflow since I don't have the third direction. So, can I do something like "extruding" the plane I have and create the 3rd direction and defining then at least 2 seeds to export the resulting grid for the tascflow code ? Please, I'll appreciate if I can see your opinion.
Regards, cfd guy

March 1, 2002, 09:33

Hi, ICEM HEXA has a 2d-3d button in the topology menu. You will need to make your CAD 3d also so the projections are vaild.

David - ICEM CFD UK

March 1, 2002, 13:09

Thanks David,
The AEA Support told me to use this command and it worked fine.
cfd guy

February 18, 2002, 15:05	HEXA: 2D grids on Tascflow.	#1
cfd guy Guest Posts: n/a	Hi everyone, I was wonder if there's a way to create grids for Tascflow starting from 2-D blocks created in CFX-HEXA. In Hexa I can create 2-D grids for CFX-4 and CFX-5, but I can't do it for Tascflow since I don't have the third direction. So, can I do something like "extruding" the plane I have and create the 3rd direction and defining then at least 2 seeds to export the resulting grid for the tascflow code ? Please, I'll appreciate if I can see your opinion. Regards, cfd guy

March 1, 2002, 09:33	Re: HEXA: 2D grids on Tascflow.	#2
David Minns Guest Posts: n/a	Hi, ICEM HEXA has a 2d-3d button in the topology menu. You will need to make your CAD 3d also so the projections are vaild. David - ICEM CFD UK

March 1, 2002, 13:09	Re: HEXA: 2D grids on Tascflow.	#3
cfd guy Guest Posts: n/a	Thanks David, The AEA Support told me to use this command and it worked fine. cfd guy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Creation of hexa dominant mesh and prism layer	gnuboard	ANSYS Meshing & Geometry	7	January 11, 2018 04:13
[ANSYS Meshing] Workbench 13: Structured Hexa Meshes	rooftop	ANSYS Meshing & Geometry	19	March 31, 2016 02:33
[ICEM] Hexa dominant meshing	Pat84	ANSYS Meshing & Geometry	19	December 2, 2015 17:20
A question about dynamic overset grids	JXIA	Main CFD Forum	4	January 10, 2008 03:50
Reloading grids in Pre	Pascale Fonteijn	CFX	1	July 7, 2003 13:33