CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   CFX-Post under 5 micron (http://www.cfd-online.com/Forums/cfx/18970-cfx-post-under-5-micron.html)

lego May 8, 2002 09:37

CFX-Post under 5 micron
 
Hi all!

We've experienced an intresting and prety error. The CFX Post can not display elements has edges under about 5 microns. I solved a problem in which there was a mesh control of less than 5 micron. In this region I can not display the results.

What can I do to solve this problem?

Bouke May 8, 2002 12:15

Re: CFX-Post under 5 micron
 
Just as an idea for a workaround, you might try to create a coarser grid just for display purposes and interpolate the fine-grid results onto that (this is of course not satisfactory if you are interested in flow details in the 5 micron scale).

lego May 9, 2002 09:15

It is a problem of my boundary layer
 
I calculate a very high Reynolds-number flow of about 0,02 mm thick turbulent boundary layer. So I use inflation, in which the thinest layer is less than 10 micron thick. And I can not display it. I think some kind of tolerance value should be reset. How can I do it?

Ciao: LEGO


All times are GMT -4. The time now is 00:02.