CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

usrsrc

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 26, 2002, 13:19
Default usrsrc
  #1
Farid
Guest
 
Posts: n/a
Hello,

My problem deals with two phases flow and pollutant transport modeling . I use the homogeneous model (modeling two phases) and mass fraction equation for pollutants.

How to avoid that pollutants being present in both phases (only in phase 1) ?

Using usrsrc with Am=0 , SP=-1 , SU=0 for phase 2, I still have pollutants in phase 1 (with cartesian grid). I try this on dam break simulation (ref-29) with pollutants in water.

Should we use same values for source terms on BF grid ?

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX 4.4 - USRSRC Joan CFX 0 February 16, 2006 17:49
USRSRC User scalar Andrea CFX 1 May 23, 2004 01:31
eddy break model using usrsrc routine dj CFX 0 October 14, 2003 01:15
how to use ICALL in subroutine usrsrc zhu CFX 1 May 21, 2002 09:00
USRSRC Alex CFX 8 January 30, 2002 07:11


All times are GMT -4. The time now is 15:22.