CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

CFX-Analyse on WinXP

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 20, 2002, 01:45
Default CFX-Analyse on WinXP
  #1
Luis Rojas-Solorzano
Guest
 
Posts: n/a
Hi,

I know CFX4.4 is not intended for WinXP platforms, however, I installed it on my newer laptop running XP and everything worked fine, except for Analyse which does not run. When I try to run it, it kicks me off and the environment windows says: " This applications has requested the Runtime to terminate it in an unusual way. ..."

I'm running on Exceed 6.1, which also might be the reason of the problem.

Before I buy the Exceed 7.0, does anybody have dealed with this problem already? and, if so, how have you handled it?

All the help will be greatly appreciated, before I have to migrate to Exceed 7.0 and/or from XP to Win2000 or NT4.0 which are supported by the software, but it has so many inconveniences trying to find out the drivers for the laptop that you know ...

Regards,

Luis

p.d.: On the other hand, since View in now not supported on CFX, how do you generate a PLOT3D file out of the dump file to introduce it, let's say into TECPLOT? Thanks again.
  Reply With Quote

Old   July 22, 2002, 15:17
Default Re: CFX-Analyse on WinXP
  #2
Ribeiro
Guest
 
Posts: n/a
Hola, Luis

I'm affraid you have to change your Unix emulator to Exceed 7.0. This version is required to w2k. Thus I believe that this requirement is the same for XP. I have run CFX in XP but just once. I cannot say that it could work always.

good luck. Ribeiro
  Reply With Quote

Old   July 22, 2002, 18:43
Default Re: CFX-Analyse on WinXP
  #3
Luis Rojas-Solorzano
Guest
 
Posts: n/a
Ribeiro, thanks for your advise. I'll be doing some adjustments during the next days, and one of them will probably be upgrading to Exceed 7.1. I'll let you know if it works. Regards,

Luis
  Reply With Quote

Old   July 23, 2002, 03:38
Default Re: CFX-Analyse on WinXP
  #4
Sheepish
Guest
 
Posts: n/a
It may be worth checking out the CFX Community pages for such info, as upon just checking, it says that Windows XP platforms are fully supported for CFX-4.
  Reply With Quote

Old   July 27, 2002, 08:07
Default Re: CFX-Analyse on WinXP
  #5
Luis Rojas-Solorzano
Guest
 
Posts: n/a
Good News. I've just installed the Exceed and Exceed 3D ver7.1, and Analyse started working on Win XP.

Thanks,

Luis
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot start CFX 12.1 on WinXP Pro Udio_NT CFX 2 June 18, 2010 07:10
PhD using CFX Rui CFX 9 May 28, 2007 05:59
how CFX output into tecplot to analyse? prayskyer CFX 5 July 19, 2006 20:32
CFX 4.4 installation problem Pandu Sattvika CFX 1 December 1, 2001 05:07
CFX Analyse James Hart CFX 3 January 25, 2001 20:38


All times are GMT -4. The time now is 02:05.