CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Multiblock grid, interface Boundary condition (http://www.cfd-online.com/Forums/cfx/19106-multiblock-grid-interface-boundary-condition.html)

Nandu August 5, 2002 07:14

Multiblock grid, interface Boundary condition
 
Hello,

I am trying to model an axisymmetric supersonic jet impinging onto a flat plate placed 5 nozzle diameters from exit of the supersonic nozzle. The model is a 5 degree sector of a cylinder.

The grid consists of three blocks, one for the jet, one for the interaction with the plate and one for the farfield region as the jet diffuses after impacting with the plate.

What is the boundary condition to specify for the grid interface between the different blocks to ensure that symmetry BC's are not placed at the interface?

regards Nandu


Jan Rusås August 5, 2002 15:02

Re: Multiblock grid, interface Boundary condition
 
Why should you specify anything at the grid interface between the blocks - don't you want the flow to continue from one block to the other? I guess if you don't have any rotaion of the flow, then a symmetry boundary in the circumferentail direction would suit. Sorry for not understanding your question clearly.


Nandu August 6, 2002 05:07

Re: Multiblock grid, interface Boundary condition
 
Thanks anyways, the CFX agents sorted my problem out from my end. Sorry once again about the ambiguity of the question.

cheers N menon


All times are GMT -4. The time now is 00:43.