CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   How to Model Three Phase Clay Slurry in CFX 5.5 (http://www.cfd-online.com/Forums/cfx/19138-how-model-three-phase-clay-slurry-cfx-5-5-a.html)

J.Yang August 26, 2002 23:52

How to Model Three Phase Clay Slurry in CFX 5.5
 
Hello everyone,

I would like to model the movement of the clay slurry in the thickener. The clay slurry consists of at least three fluids: dispersed solid phase --sand, dispersed solid phase -- clay and continuous phase of water. In CFX 5.5.1 at most two fluids can be modelled. So anyone know how I can resolve this problem.

Thanks in advance!

J.Yang

Neale August 27, 2002 14:51

Re: How to Model Three Phase Clay Slurry in CFX 5.
 
Actually, you should be able to set up N phase problems in 5.5.1. Where does CFX-Build say you can't?

Neale

J.Yang August 28, 2002 12:06

Re: How to Model Three Phase Clay Slurry in CFX 5.
 
Thank you. I got it.

J.Yang


All times are GMT -4. The time now is 18:46.