CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Meshing error on CFX 5.5.1

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 24, 2002, 15:40
Default Meshing error on CFX 5.5.1
  #1
Bruno Sersante
Guest
 
Posts: n/a
Hi,

I´m working on CFX 5.5.1 with two tunnels of 1.8Km each . After set the initial conditions, I´m trying to create a surface mesh but the pre-procesor stops with the following error:

" Dr Watson: An application error has ocurred and an application error log is being generated.

srfmsh_gtm.exe

exception: access violation(0xc0000005), adress:0x7800d376 "

CPU description: - Windows NT.

- Pentium 4, 1.5GHz.

- 512 RAM.

Any help will be highly appreciated. Regards
  Reply With Quote

Old   September 24, 2002, 16:56
Default Re: Meshing error on CFX 5.5.1
  #2
Astrid
Guest
 
Posts: n/a
Looks like there is a conflict with other applications. Close all other applications, including the small programs running in the background, and restart CFX.

To avoid this kind of errors, we have only installed CFX on our computers. In the past for example, we observed that Paint Shop Pro can have a conflict with CFX 4.

Astrid
  Reply With Quote

Old   September 24, 2002, 17:42
Default THX Astrid
  #3
Bruno Sersante
Guest
 
Posts: n/a
Thx Astrid,

The problem appears in each computer that I use (3 differents computers)and i don´t know what to do.

If you have others suggestions, I'll apreciate it
  Reply With Quote

Old   September 24, 2002, 19:42
Default Re: THX Astrid
  #4
Astrid
Guest
 
Posts: n/a
- What might help: Create a new directory, change the name of your .db-file and restart CFX-build.

- If not: dial 911 (your local CFX-Helpdesk).

Astrid
  Reply With Quote

Old   September 25, 2002, 10:35
Default Re: THX Astrid
  #5
Dave
Guest
 
Posts: n/a
Bruno, I've experienced similar problems. Does the problem persist if you close build and then open it again ? Do you have any subdomanins defined ? Have you had a mesh out of the same podel previously ? Sorry for all the questions, Dave
  Reply With Quote

Old   October 3, 2002, 18:53
Default Re: THX Astrid
  #6
hannah liang
Guest
 
Posts: n/a
I met the same problem when I write the def. file. especially when I define the subdomain. I am not sure if this is caused by software or other reasons.

Hannah
  Reply With Quote

Old   October 4, 2002, 03:09
Default Re: THX Astrid
  #7
Astrid
Guest
 
Posts: n/a
Is it sensitive to the surface mesher used?

Astrid
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX meshing moon1234 CFX 0 January 24, 2010 07:43
2D simulation - ICEM meshing for CFX question Ben Makhal CFX 5 April 11, 2007 09:44
CFX Meshing Error! C Mc Guinness Main CFD Forum 0 April 3, 2005 14:20
About PI meshing in CFX 5.6 David CFX 2 June 26, 2003 15:17
cfx, meshing + examples mark Main CFD Forum 1 December 22, 2000 00:10


All times are GMT -4. The time now is 05:29.