CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   CFX / TASCFLOW Validation (http://www.cfd-online.com/Forums/cfx/19213-cfx-tascflow-validation.html)

Veebs October 7, 2002 06:51

CFX / TASCFLOW Validation
 
Hi, Did any one tried to validate CFX / TSACFLOW against external flow (involving transonic mach number range, ONERA WING / TRANSONIC AIRFOIL as given in reference down) http://www.grc.nasa.gov/WWW/wind/valid/validcases.html

I am trying for the same and could not see the match. Please share your experience

Thanks Veebs

Bart Prast October 8, 2002 04:34

Re: CFX / TASCFLOW Validation
 
I would e very interrested in the results as well.

sheetal October 25, 2002 08:09

Re: CFX / TASCFLOW Validation
 
Hi Veebs and Bart,

I also have done the same validation analysis. i.e. Onera wing. My results are also not matching with the data given on the website. I did analysis in TASCflow and studied the transonic flow over wing. The code is not able to capture the shock as mentioned in the site. The simulated results look like the analysis done for higher mach no. Veebs have you found the reason for the descrepancy?

regards, Sheetal


All times are GMT -4. The time now is 17:13.