CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   CFX-Post batch run error (http://www.cfd-online.com/Forums/cfx/19296-cfx-post-batch-run-error.html)

KG November 13, 2002 05:44

CFX-Post batch run error
 
Dear CFX-5 users,

My CFX-POst in GUI mode work fine but when I try to run CFX-Post in batch mode with

cfxpost.bat –batch NAME.cse

following message in DOS console appear:

-------------------------------------------------------------------------------------------------------

Can't locate Carp.pm in @INC (@INC contains: C:\cfx\CFX-5.5\cfxpost\5.5\\lib\ccl parser \CYGWIN32_NT\perl\lib \CYGWIN32_NT\perl\lib\MSWin32-x86 C:\cfx\CFX-5.5\cf xpost\5.5\lib\perlTools C:\cfx\CFX-5.5\cfxpost\5.5\lib\winnt C:\cfx\CFX-5.5\cfxp ost\5.5\lib\perlLib\WindowsNT .) at C:\cfx\CFX-5.5\cfxpost\5.5\\lib\cclparser/CC L/Utils.pm line 7. BEGIN failed--compilation aborted at C:\cfx\CFX-5.5\cfxpost\5.5\\lib\cclparser/C CL/Utils.pm line 7. BEGIN failed--compilation aborted at C:\cfx\CFX-5.5\cfxpost\5.5\\lib\cclparser/C CL/embeddedParserInit.pl line 1. CCL parser failed with message: Error: Cannot parse perl code

-------------------------------------------------------------------------------------------------------

Any advice will be very helpful to me. Thanks in advance.

Best Regards,

KG

Robin November 13, 2002 09:38

Re: CFX-Post batch run error
 
Try running Post with the command cfx5post instead of cfxpost.bat.

Robin

KG November 13, 2002 09:53

Re: CFX-Post batch run error
 
Thanks Robin for your help. It's working.

This is something completely different than CFX-Post user guide instruction. Thank you again.

Best Regards, KG

Holidays November 14, 2002 03:26

Re: CFX-Post batch run error
 
I have just looked into the on-line manual (P;228 actually) and I cannot fault what Robin said. It IS written: cfx5post -batch myfile.cse myfile.res. The documentation is correct.

KG November 14, 2002 05:33

Re: CFX-Post batch run error
 
Hi Holidays,

This is from my manual "line_interface_mode.pdf" p.230

============================================

To run in Batch mode:

Windows: Execute the command

"CFX-PostROOT\cfxpost.bat -batch filename.cse" at the DOS command prompt.

UNIX: Execute the command

"CFX-PostROOT/cfxpost -batch filename.cse" at the command prompt.

============================================

Are we have/reading the same manual?

Best Regards,

KG

Robin November 14, 2002 09:29

Re: CFX-Post batch run error
 
KG - CFX-5.5 manual Holidays - CFX-5.5.1

;-)

KG November 14, 2002 10:13

Re: CFX-Post batch run error
 
Thanks Robin for make me inform about CFX products.

How can I get CFX-5.5.1? From CFX-community site?

Best Regards,

KG

Robin November 14, 2002 14:23

Re: CFX-Post batch run error
 
If you have a current license, you should have received 5.5.1 last summer.

Robin

Holidays November 15, 2002 03:23

Re: CFX-Post batch run error
 
Sorry I assumed we were taking 5.5.1 which is the current version until 5.6Beta

Neale November 15, 2002 21:23

Re: CFX-Post batch run error
 
Are you expecting to get a copy of 5.6beta?

KG November 16, 2002 09:08

Re: CFX-Post batch run error
 
Dear Neale,

Yes I would like to get a copy of 5.6beta? Is it possible?

Thanks,

KG

Neale November 16, 2002 20:16

Re: CFX-Post batch run error
 
Well you might ask your service rep and see if you can get on the beta tester list. However, this has certain implications on your time. i.e., you must provide feedback for example.

Neale.

Robin November 18, 2002 21:02

Re: CFX-Post batch run error
 
All,

There is a form on the CFX-5 page of the community site which you can fill out to be added to the beta program.

http://www.software.aeat.com/cfxcomm...-5/default.asp

Robin

KG November 20, 2002 04:56

Re: CFX-Post batch run error
 
Sorry Robin, I don't have CFX-Community acount.

Regards,

KG

Neale November 21, 2002 10:51

Re: CFX-Post batch run error
 
Any current client can get one, ask your service rep, or just go to the website www.cfx.aeat.com and attempt to log into the community site, if you have no username and password it forwards you to a form so you can get one.

Neale


Neale November 21, 2002 10:52

Re: CFX-Post batch run error
 
Here is the link:

http://www.software.aeat.com/cfx/community/apply.htm



All times are GMT -4. The time now is 11:59.