CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   Domain and sub-domain (https://www.cfd-online.com/Forums/cfx/19340-domain-sub-domain.html)

Carola November 26, 2002 18:20

Domain and sub-domain
 
Hi Guys!! I´m trying to simualte a cylinder with another one inside, the big one contain air that will pass inside the smallest through a hole on the surface of the last one.

Anyone know how to do this?

Carola

Astrid November 26, 2002 18:33

Re: Domain and sub-domain
 
As mentioned before....... Create a B-rep solid for the large cilinder and a second B-rep solid for the smaller one. Then create the main fluid domain in the first solid. Create a fluid sub-domain for the second solid. Create a thin surface (wall BC) on all surfaces of the smaller cilinder, except for the hole.

Are you facing difficulties here?

Astrid

Carola November 27, 2002 12:34

Re: Domain and sub-domain
 
Thanks for your help!!, my model it´s working now!!

Carola


All times are GMT -4. The time now is 15:23.