CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Momentum source

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 16, 2003, 02:16
Default Momentum source
  #1
Jackie
Guest
 
Posts: n/a
Hi all,

I have a question about momentum source. The model i created is just a cylindrical pipe with 10 mm diameter and 50 mm long, the fluid flow along the tube is sucrose with density is equal to 1324.7 kg/m^3 and dinamic viscosity is 0.23677 mPa.s

The flow at the portion of inlet is set to inlet boundary condition, normal velocity 0.005 m/s. I set the opposite side of the inlet to outlet BC., average relative static temperature 0.0 Pa and set the tube wall to exteria wall , no slip condition. There are a thin concentric cylindrical subdomain (0.2mm thick) in the middle length of the tube. I specify the momentum source along the direction of the tube length to 5 kg/m^2s^2 .

I expect to see a changeing of volocity profile effected by momentum add but it's not. There's no difference of result between no momentum add and 5 kg/m^2s^2 neither nor 10 30 and 100 kg/m^2s^2 momentum add. All of momementum add value i used give the same result.

What's wrong?Did I set the wrong BC? Anybody who have an idea give me a suggestion please
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[swak4Foam] swak4foam building problem GGerber OpenFOAM Community Contributions 54 April 24, 2015 17:02
Simulation of Axial Fan Flow using A Momentum Source Subdomain Liam CFX 28 July 16, 2013 09:24
pisoFoam compiling error with OF 1.7.1 on MAC OSX Greg Givogue OpenFOAM Programming & Development 3 March 4, 2011 18:18
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 02:24
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 18:51


All times are GMT -4. The time now is 10:50.