CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Meshing by specify a type and number of node

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 7, 2003, 05:49
Default Meshing by specify a type and number of node
  #1
Jackie
Guest
 
Posts: n/a
Hollo all

Could anyone can tell me. Is it posible to creat mesh in CFX5.5.1 by specifiy type of mesh (such as Hexahedral) and number of nodes in each direction.

Thank you in advance.
  Reply With Quote

Old   February 7, 2003, 06:39
Default Re: Meshing by specify a type and number of node
  #2
Bob
Guest
 
Posts: n/a
Yes, but you have to use the mesh only mode when you first generate the new data base. You also need to construct your geometry differently. You can not use Brep solids. All solids representing the domain must be six sided. There is a tutorial to show how to do this. Once the solid has been generated, and mesh implamented then you need to import the mesh into a new database in the import mesh only mode. This is all a little long winded, but I think things are going to be more simple in CFX5.6 ?? Bob
  Reply With Quote

Old   February 7, 2003, 12:00
Default Re: Meshing by specify a type and number of node
  #3
Jackie
Guest
 
Posts: n/a
I appreciate your kind answer to my questions Bob.

Jackie
  Reply With Quote

Old   February 7, 2003, 12:47
Default Re: Meshing by specify a type and number of node
  #4
Hannah liang
Guest
 
Posts: n/a
Hi, Jackie, you can change the mesh mode from AFI to Patran Volume Meshing in "Preference" panel in the build, using structure mesh instead of unstructured one. That's it!

Hannah
  Reply With Quote

Old   February 9, 2003, 10:59
Default Re: Meshing by specify a type and number of node
  #5
Jackie
Guest
 
Posts: n/a
Thank you very much Hannah ^_^
  Reply With Quote

Old   April 13, 2003, 17:54
Default Re: Meshing by specify a type and number of node
  #6
siavash
Guest
 
Posts: n/a
hello how are you ? in fack im a student of mechanic engineering and I need a program about compresible flow I need a source code of a program that we give some jeometrics and it solve and give us numbers or information that we need thanks bye
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
second order schemes marine OpenFOAM 67 April 11, 2022 19:19
[mesh manipulation] Mesh Refinement Luiz Eduardo Bittencourt Sampaio (Sampaio) OpenFOAM Meshing & Mesh Conversion 42 January 8, 2017 13:55
Pressure instability with rhoSimpleFoam daniel_mills OpenFOAM Running, Solving & CFD 44 February 17, 2011 18:08
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15


All times are GMT -4. The time now is 00:48.