CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Some questions on terminology of BladeGen

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 9, 2003, 07:51
Default Some questions on terminology of BladeGen
  #1
Darcy
Guest
 
Posts: n/a
Dear all I got some questions on BladeGen terminology. I don't know the meanings of these terms :

1.Urms 2.Cm 3.Ct 4.C(abs total) 5.Flow Angle(abs) 6.Wt(rel tang) 7.W(rel total) 8Flow Angle(rel)

Since this is my first trip to design and analysis of pump. I hope that there is someone generous enough to explain these term for me. thanks first darcy
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
possible interview questions atturh Main CFD Forum 1 February 21, 2012 09:53
[TGrid] Bladegen w/o turbogrid Biskvito ANSYS Meshing & Geometry 5 September 6, 2011 08:13
BladeGen and CFX - basic question Dip CFX 5 August 5, 2010 17:21
NACA0012 Validation Case Questions ozzythewise Main CFD Forum 3 August 3, 2010 14:39
BladeGen problem David Wang CFX 4 November 21, 2007 08:30


All times are GMT -4. The time now is 13:18.