CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   cfxexport # gtmconvert.exe (http://www.cfd-online.com/Forums/cfx/19719-cfxexport-gtmconvert-exe.html)

Bony Quach June 24, 2003 08:52

cfxexport # gtmconvert.exe
 
How come a result file exported in CGNS by cfx5export is incompatible with gtmconvert.exe(cgns->def with physics in an auxiliary def file)???

I get this error message :

CFX> %gtmconvert.exe -o StaticMixer_001.cgns S02.def StaticMixer.def

Error: ------

Program: gtmconvert Subroutine: Location_check

Problem: The supplied CCL is not valid.

The location of boundary "StaticMixer Default" is invalid: Region "Solid 1.1" is not recognised. Region "Solid 1.3" is not recognised. Region "Solid 1.5" is not recognised. Region "Solid 1.6" is not recognised. Region "Solid 1.7" is not recognised. Region "Solid 1.8" is not recognised.

The location of boundary "in1" is invalid: Region "in1" is not recognised.

The location of boundary "in2" is invalid: Region "in2" is not recognised.

The location of boundary "out" is invalid: Region "out" is not recognised.

ERROR: Unable to write definition file.

thanks

Bony Quach June 24, 2003 10:27

Re: cfxexport # gtmconvert.exe
 
In Fact it works even if it gives a message error.

Bony Quach June 24, 2003 11:31

Re: cfxexport # gtmconvert.exe
 
sorry again,

I was wrong : It really doesn,t work --> it doesn't update the mesh...


All times are GMT -4. The time now is 18:57.