CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   Solver Error (v5.5.1) (https://www.cfd-online.com/Forums/cfx/19745-solver-error-v5-5-1-a.html)

Donna July 2, 2003 07:42

Solver Error (v5.5.1)
 
Hello,

I've encountered a problem recently. The error message is as follows,

ERROR #001100279 has occured in subroutine ErrAction. Message:

***Run-time memory configuration error***

Not enough free memory is currently available on the system. Could not allocate requested memory - exiting!

Would someone give me suggestion to fix this problem? Thank you!

best regards, Donna


sam July 2, 2003 11:21

Re: Solver Error (v5.5.1)
 
Hi Dona, i have faced the same problem and what i did is that i just turned on that show advanced control option in the solve control manager and write down a factor of 1.1 in memory allocation multiplier box in the solver tab. Hope this will solve ur problem.Other wise try to increase or allocate the stack memory size.

centaur_ks July 2, 2003 22:50

Re: Solver Error (v5.5.1)
 
try to see the no of nodes and just in others option write down this -nnode XK where X will be no of nodes 30% more then the actual model size something like if i have 100K nodes then i wud write

-nnode 130K

this shd solve your problem

-J

Donna July 9, 2003 23:47

Re: Solver Error (v5.5.1)
 
Hi Sam and centaur_ks,

Thanks for your help! It works now! =)

Donna



All times are GMT -4. The time now is 05:57.