CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Multi-outlet boundary condition?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 10, 2003, 03:10
Default Multi-outlet boundary condition?
  #1
windhair
Guest
 
Posts: n/a
I have a multi outlets and multi inlets configuration, if I set the same inlet velocity, I can get a converged result after I define pressure outlet condition. But if I define different inlet velocity reapectively, it can not converge, so I wander if it is caused by unsuitable definition of pressure outlet BC. Is here someone can give me some advice on how to define such outlet B.C.

Thanks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Outlet Pressure-flow coupled boundary condition (Windkessel) cfdfsi Fluent UDF and Scheme Programming 1 October 12, 2011 10:01
Boundary Condition outlet natantyt FLUENT 0 September 27, 2010 15:30
inlet and outlet boundary condition for turbomachinery solution siamak1424 OpenFOAM 2 August 15, 2009 11:14
Outlet boundary condition CN FLUENT 6 May 22, 2005 09:37
outlet massflow boundary condition ?? Charles Renard FLUENT 5 August 24, 2001 15:47


All times are GMT -4. The time now is 13:23.