CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

a question about volume fraction

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 19, 2003, 10:22
Default a question about volume fraction
  #1
bill
Guest
 
Posts: n/a
hello,evryone I have a question about volume fraction in multiphase flow problem.I want to add a user scalar in cfx4.4. when I defined the source term P of the scalar in user fortran,which is correct, Su=Su+P or Su=Su+P/VF? VF is the volume fraction of corresponding phase.
  Reply With Quote

Old   September 20, 2003, 00:37
Default Re: a question about volume fraction
  #2
Jeff
Guest
 
Posts: n/a
A scalar, such as a mass fraction, is added in as such. It will be added as mass/(mass of phase in cell). If you are adding a source which is on a volume basis, you will have to convert it using densities and volume fractions to get it to a mass basis.

Jeff
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
VOF model - volume fraction residual question Wim Heirwegh FLUENT 9 July 8, 2013 14:44
Solving the Volume Fraction Equation in a Multiphase M. Max585 FLUENT 1 March 20, 2012 08:49
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
volume fraction, Mass fraction and Bulk Mass flow Dr.jones CFX 1 January 25, 2006 05:32
Volume Fraction cheong FLUENT 1 November 28, 2001 05:06


All times are GMT -4. The time now is 12:36.