CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

roughness of thin surface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 27, 2003, 23:12
Default roughness of thin surface
  #1
colins
Guest
 
Posts: n/a
hi,friends I need to difine different roughness on the twos of thin surface,who knows how to? I have referred to this topic, http://www.cfd-online.com/Forum/cfx_....cgi?read=4397 but I can not distinguish the two surfaces,e.g. which one is the inside one or which one is the upper,anyone could help me? thanks.
  Reply With Quote

Old   October 28, 2003, 13:41
Default Re: roughness of thin surface
  #2
Robin
Guest
 
Posts: n/a
Hi Colins,

To find the direction, define an outlet boundary condition to the surface. The arrows will be on the side which is touching the fluid. You can then switch it back to a wall and apply the appropriate B.C.

-Robin
  Reply With Quote

Old   October 28, 2003, 23:03
Default Re: roughness of thin surface
  #3
colins
Guest
 
Posts: n/a
To robin, I have tried following what you suggested,but I cannot apply a inlet/outlet boundary on a subdomain surface,the error reported was "The surface list 'Solid 4.4' contains the following error(s). Solid 4.4 is not an exterior face of a domain." Btw,I am using CFX5.5 -colins
  Reply With Quote

Old   October 29, 2003, 04:05
Default Re: roughness of thin surface
  #4
njzeo
Guest
 
Posts: n/a
first,you can creat a subdomain which include the thinsurface you will defined,then in the condition boundary,you'd creat the thinsurface,and you may define different roughness on the two side of the thinsurface.may you succeed1
  Reply With Quote

Old   October 29, 2003, 13:06
Default Re: roughness of thin surface
  #5
Robin
Guest
 
Posts: n/a
Upgrade to 5.6.

-Robin
  Reply With Quote

Old   October 30, 2003, 01:13
Default Re: roughness of thin surface
  #6
colins
Guest
 
Posts: n/a
To Robin, thank you.I have done it. -colins
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
nutRoughWallFunction and Surface Roughness Documented AlanR OpenFOAM Programming & Development 64 January 6, 2024 08:13
[Gmsh] Problem with Gmsh nishant_hull OpenFOAM Meshing & Mesh Conversion 23 August 5, 2015 03:09
Surface roughness alefem FLOW-3D 6 June 3, 2010 13:49
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19
free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin Kaushik FLUENT 1 May 8, 2000 07:47


All times are GMT -4. The time now is 22:59.