- **CFX**
(*http://www.cfd-online.com/Forums/cfx/*)

- - **Qs on radiation models
**
(*http://www.cfd-online.com/Forums/cfx/20056-qs-radiation-models.html*)

Qs on radiation models
+--------------------------------------------------------------------+
| I-Radiation | #Its | Vol Chg | Sur Chg | %Lost %Imbal | | Gray | 3 | 0.0E+00 | 1.3E-03 | 0.00 2.71 | Comes from a .out file applying Discrete Transfer Method. +--------------------------------------------------------------------+ | I-Radiation | | %SD Sur | %SD Vol | %Lost %Imbal | | Full Spectrum | | 5.0E+01 | 1.0E+02 | 0.00 0.34 | +----------------------+------+---------+---------+------------------+ Comes from a .out file applying Monte Carlo Method. What's the meanings of "Vol Chg", "Sur Chg", and "%SD" ? Are they also a standard of convergence, how accurate for the figures 0.0E+00, 1.3E-03(DT) and 50, 100(Monte Carlo) here? If the convergence is not nice enough, how can I improve it? Thank you in advance. Bo |

All times are GMT -4. The time now is 08:34. |