Instable Post, Pre and Build

December 21, 2003, 06:27

Hi all,

For some reason Post, Pre, and Build seem to hang after a few movements / rotations of my model. Does anyone know why? Did anyone have such features before?

I have reinstalled Windows (NT4) and CFX but this does not help. Could it be a hardware problem?

Pascale

December 21, 2003, 11:05

Open the troubleshooting panel in you display preferences and reduce the graphics acceleration. It may help to finally upgrade to Windows 2000 as well!

December 21, 2003, 13:00

It is very difficult to answer the question if it could be a hardware problem when you don't provide any information about your hardware! Are you running it through a network or is it alocal installion. Does your graphic card support open GL, and how much memory do you have etc....

December 23, 2003, 00:13

I also have such problems. I`m using CFX 5.6 on Windows 2000 with GeForce4 graphic card. In my case CFX-Pre seems to be very instable with relatively average mesh(around 600k cells). It did not crashed, but interface become unusable in case of opening various widgets. I reinstalled graphics drivers, but everything stays in same state. CFX-Post also crashed many times after I edited some objects and trying to manipulate view.

December 23, 2003, 02:58

I have WinNT4-SP6 with GeForce2. This could be the problem. I will check it further.

Pascale

December 23, 2003, 06:31

On Linux CFX-Pre works fine with same file

December 21, 2003, 06:27	Instable Post, Pre and Build	#1
Pascale Fonteijn Guest Posts: n/a	Hi all, For some reason Post, Pre, and Build seem to hang after a few movements / rotations of my model. Does anyone know why? Did anyone have such features before? I have reinstalled Windows (NT4) and CFX but this does not help. Could it be a hardware problem? Pascale

December 21, 2003, 11:05	Re: Instable Post, Pre and Build	#2
roadkill Guest Posts: n/a	Open the troubleshooting panel in you display preferences and reduce the graphics acceleration. It may help to finally upgrade to Windows 2000 as well!

December 21, 2003, 13:00	Re: Instable Post, Pre and Build	#3
Jan Rusås Guest Posts: n/a	It is very difficult to answer the question if it could be a hardware problem when you don't provide any information about your hardware! Are you running it through a network or is it alocal installion. Does your graphic card support open GL, and how much memory do you have etc....

December 23, 2003, 00:13	Re: Instable Post, Pre and Build	#4
deLuther Guest Posts: n/a	I also have such problems. I`m using CFX 5.6 on Windows 2000 with GeForce4 graphic card. In my case CFX-Pre seems to be very instable with relatively average mesh(around 600k cells). It did not crashed, but interface become unusable in case of opening various widgets. I reinstalled graphics drivers, but everything stays in same state. CFX-Post also crashed many times after I edited some objects and trying to manipulate view.

December 23, 2003, 02:58	Re: Instable Post, Pre and Build	#5
Pascale Fonteijn Guest Posts: n/a	I have WinNT4-SP6 with GeForce2. This could be the problem. I will check it further. Pascale

December 23, 2003, 06:31	Re: Instable Post, Pre and Build	#6
deLuther Guest Posts: n/a	On Linux CFX-Pre works fine with same file

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
chart for transiente simulation - CFX Post	rogbrito	CFX	0	June 22, 2009 12:12
Reloading grids in Pre	Pascale Fonteijn	CFX	1	July 7, 2003 13:33