CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

ICEMCFXtoCFX error message. Please help.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 6, 2004, 22:17
Default ICEMCFXtoCFX error message. Please help.
  #1
Melisa
Guest
 
Posts: n/a
Hi guys,

I finally get my topology done. My geometry size is about 24m*4m*4m. I used the default tolerance (0.1&30deg). The curves are all red. Shouldn't be any problem, right?

When I try to set the mesh size and click on "Apply", the following error message just pops up:

ic_geo_set_family_params: can't set family params on ORFN

Can u guys please tell me what it's all about and how to get rid of this problem?

I did't get this problem when I did the tutorial.

Thank you for being so helpful...
  Reply With Quote

Old   January 7, 2004, 17:30
Default Re: ICEMCFXtoCFX error message. Please help.
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi Melisa,

Have you set a body or material point? What have you set for the global mesh size? Where are you trying to set the mesh size?

Glenn
  Reply With Quote

Old   January 9, 2004, 23:52
Default Re: ICEMCFXtoCFX error message. Please help.
  #3
Melisa
Guest
 
Posts: n/a
Thanks, Glenn. The problem seems to be solved when I define the body using the topology.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 22:14.