CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   junction box routine (http://www.cfd-online.com/Forums/cfx/20113-junction-box-routine.html)

Lexi January 19, 2004 05:28

junction box routine
 
Hallo!

I want to read in my own data with a junction box routine. I started with an example very similar to the example in the solver modelling manual on page 400. I understand that when you use the junction box location "user input" a directory USER_DATA is created automatically. But this does not happen and the solver stops with the error message

| The CFX-5 solver could not be started: No child processes. No | | results file has been created.

But the first three writing commands in the junction box routine are carried out correctly.

Has anybody had this problem either?

Thanks in advance! Lexi

Glenn Horrocks January 20, 2004 16:17

Re: junction box routine
 
Hi Lexi,

I have no idea about the problem you are having, but I'll bet there's a bug in your fortran somewhere which is causing the crash.

Glenn

Lexi January 21, 2004 04:55

Re: junction box routine
 
Hi Glenn!

Thank you for trying to help me. I just found the mistake. I took a wrong junction box location, "start of run" instead of "user input".

Lexi


All times are GMT -4. The time now is 03:14.