CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

specification in Particle Tracking

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 20, 2004, 17:45
Default specification in Particle Tracking
  #1
Cui
Guest
 
Posts: n/a
When I do the particle tracking in CFX5.6, it allows me to specify the number of particles for tracking, but I don't have any control on the location of these seeds, could any one tell me how to do that if it's possible? Thanks.
  Reply With Quote

Old   January 25, 2004, 09:58
Default Re: specification in Particle Tracking
  #2
reto
Guest
 
Posts: n/a
hello cui,

You have to define faces in your model, where the origin locations of the seeds should be. You must then define these face as Inlet BC's with the required parameters.

As far as I know it's not yet possible to define point sources by X, Y, Z in the domain.

reto
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blood Damage Modelling via Particle Tracking in a Centrifugal Heart Pump scatman CFX 5 May 5, 2011 08:23
massless particle tracking problem Renold FLUENT 0 January 26, 2011 15:23
Particle Tracking for ion Jun CFX 2 August 31, 2010 09:19
Number density tracking rather than particle tracking Rebecca Main CFD Forum 2 April 23, 2009 13:52
DPM UDF particle position using the macro P_POS(p)[i] dm2747 FLUENT 0 April 17, 2009 02:29


All times are GMT -4. The time now is 19:13.