|
[Sponsors] |
January 28, 2004, 04:58 |
monitorpoint in 5.6
|
#1 |
Guest
Posts: n/a
|
hi,
Does anyone know how should I define monitor points in 5.6? according to the manual the mon.point definition window should look like this but in my Pre it looks like that . The boxes for the point coordinates are dead - impossible to enter values Is it possible to define mon. point via editing the def file (in the solver man. or exporting the ccl and editing it)? Should I ask for some kind of new patch? I've already installed several patches, including Pre patch 200307081045 |
|
January 28, 2004, 11:45 |
Re: monitorpoint in 5.6
|
#2 |
Guest
Posts: n/a
|
You can add them at runtime from the command line as well.. The section of CCL you require follows:
FLOW: OUTPUT CONTROL: MONITOR OBJECTS: MONITOR POINT: joe Option = Cartesian Coordinates Domain Name = <your domain> Coord Frame = Coord 0 X = ??? [m] Y = ??? [m] Z = ??? [m] Output Variables List = Velocity, Temperature END END END END For multiple monitor point locations, just copy the MONITOR POINT section, rename and modify as needed.. You can start the run as: cfx5solve -def your_file.def -ccl file_with_ccl_above or cfx5cmds -def your_file.def -text your_file.ccl -read add the CCL section above to your_file.ccl and remerge (using -write this time).. And run it as usual from the Solver Manager.. I hope this helps, Juan Carlos |
|
January 28, 2004, 11:55 |
Re: monitorpoint in 5.6
|
#3 |
Guest
Posts: n/a
|
Thanks very much. This will be very useful. bogesz
|
|
January 29, 2004, 07:22 |
Re: monitorpoint in 5.6
|
#4 |
Guest
Posts: n/a
|
Hi I know more easy manner. You have to switch on expression and write something (i.e. bleble) and then close window. At next opening window you have active boxes. good luck
|
|
January 29, 2004, 07:38 |
Re: monitorpoint in 5.6
|
#5 |
Guest
Posts: n/a
|
Thanks, it's working! bog.
|
|
January 29, 2004, 16:25 |
Re: monitorpoint in 5.6
|
#6 |
Guest
Posts: n/a
|
This may be a bug of CFX5.6 because I had the same problem. You can just add a new monitorpoint, then delete the old one. Everything will be ok.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFX 5.6 mesh build | shhe | CFX | 1 | February 13, 2004 04:27 |
CFX 5.6 - on XP | cameron | CFX | 1 | January 26, 2004 12:27 |
CFX build 5.6 | Richard | CFX | 8 | September 10, 2003 12:20 |
CFX 5.5 and 5.6 | Peter | CFX | 1 | August 22, 2003 08:50 |
Modelling thin surfaces in 5.6 | Louwrens | CFX | 0 | August 16, 2003 10:47 |