CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

551 solver error help needed!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 19, 2004, 12:48
Default 551 solver error help needed!
  #1
bogesz
Guest
 
Posts: n/a
Hi,, hope U can help me.

after starting a simulation I always got this:

ERROR #001100279 has occurred in subroutine ErrAction. Message: Stopped in routine cKFcVx

It is written right after the mem usage info. The def file - and the problem is the same as a previous one which was good to run. the turb model was changed fron k-e to SST and the number of infl. layers were increased from 5 to 10-15. The total element number is close to the original one. I have 1 GB RAM using the CFX under XP but I had the same experience on another computer (2 GB, 2 CPUs, Linux). So I guess its not a problem of the mem size. Pleeeease, help!! Thank you very much
  Reply With Quote

Old   February 19, 2004, 17:25
Default Re: 551 solver error help needed!
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi Bogesz,

Ditto my previous response to Atit - why are yuou still using the 5.5.1 version? 5.6 is the current version. You may well find strange errors like this ne disappear with the newer version.

Regards, Glenn
  Reply With Quote

Old   February 20, 2004, 11:04
Default Re: 551 solver error help needed!
  #3
bogesz
Guest
 
Posts: n/a
qrva anyád!

By the way that's an idea very useful. Thanks, Glen!

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Creating New Solver: For particle-laden compressible jets sankarv OpenFOAM Running, Solving & CFD 17 December 3, 2014 20:41
Quarter Burner mesh with periosic condition SamCanuck FLUENT 2 August 31, 2011 11:34
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
Compiling new Solver with wmake lin123 OpenFOAM 3 April 13, 2010 14:18
Symmetry plane error in solver Santiago Orrego. CFX 6 January 31, 2007 08:09


All times are GMT -4. The time now is 02:28.