CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Error in Solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 21, 2004, 15:49
Default Error in Solver
  #1
strudl
Guest
 
Posts: n/a
Hello, Does anyone undertand this error please, I am doing a simulation of a bluff body using SST.Until the error, all the convergence criteria era being met. I am running CFX5.6

Details of error:- ---------------- Error detected by routine PSHDIR CDRNAM = EQUATIONS/MOM_FL1 /IELG5 CRESLT = NONE

+--------------------------------------------------------------------+ | Writing crash recovery file | +--------------------------------------------------------------------+

+--------------------------------------------------------------------+ | ERROR #001100279 has occurred in subroutine ErrAction. | | Message: | | Stopped in routine MEMERR | | | | | | | | | | | +--------------------------------------------------------------------+

+--------------------------------------------------------------------+ | An error has occurred in cfx5solve: | | | | The CFX-5 solver exited with return code 1. No results file has | | been created. | +--------------------------------------------------------------------+

End of solution stage.

+--------------------------------------------------------------------+ | Warning! | | | | The CFX-5 Solver has written a crash recovery file. This file has | | been saved as /home/CFD-2/Test2/modela_001.res.err and may be an | | aid to diagnosing the problem or restarting the run. More details | | should be available in the solver output section of the output | | file. | +--------------------------------------------------------------------+

This run of the CFX-5 Solver has finished.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
thobois class engineTopoChangerMesh error Peter_600 OpenFOAM 4 August 2, 2014 09:52
A New Solver for Supersonic Combustion nakul OpenFOAM 6 March 30, 2014 03:00
A New Solver for Supersonic Combustion nakul OpenFOAM Announcements from Other Sources 18 February 19, 2013 08:48
Development of a Low mach PISO solver nishant_hull OpenFOAM Programming & Development 0 August 25, 2009 12:48
why the solver reject it? Anyone with experience? bearcat CFX 6 April 28, 2008 14:08


All times are GMT -4. The time now is 12:19.