CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Mesh Extrusion in ICEM4CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 25, 2004, 10:53
Default Mesh Extrusion in ICEM4CFX
  #1
sacha
Guest
 
Posts: n/a
Hi all, I tried to use the mesh extrusion available in ICEM-4-CFX. I meshed a part of my cylinder using the automatic way and created a part consiting on a face (disc). I then extruded the mesh and it worked fine; BUT when I try to export it in CFX-MESH I got a message saying that my extrusion can not be imported because it is combinaison of elements, faces and nodes.

Any suggestion?

Thanks
  Reply With Quote

Old   February 25, 2004, 12:32
Default Re:CORRECTION: Mesh Extrusion in ICEM4CFX
  #2
sacha
Guest
 
Posts: n/a
Hi all, I tried to use the mesh extrusion available in ICEM-4-CFX. I meshed a part of my cylinder using the automatic way and created a part consiting on a face (disc). I then extruded the mesh and it worked fine; BUT when I try to export it to CFX-PRE I got a message saying that my extrusion can not be imported because it is combinaison of elements, faces and nodes.

Any suggestion?

Thanks
  Reply With Quote

Old   February 25, 2004, 17:13
Default Re:CORRECTION: Mesh Extrusion in ICEM4CFX
  #3
Glenn Horrocks
Guest
 
Posts: n/a
Hi Sasha,

You have to be careful the volume elements are in a different family to the shell elements. If a family contains both shell and volume elements it gives the error you mention.

You may have to manually change the family of some shell or volume elements to fix this. You can do this by turning all geometry off, then you can select elements and manually change the family selected elements are associated with.

Regards, Glenn
  Reply With Quote

Old   February 26, 2004, 06:07
Default Re:CORRECTION: Mesh Extrusion in ICEM4CFX
  #4
sacha
Guest
 
Posts: n/a
It works!! Thank you Glenn!!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 06:25
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11
2d irregular grid Remy Main CFD Forum 1 December 22, 2008 05:49
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 18:56.