CFD Online Logo CFD Online URL
Home > Forums > CFX

MeTis Partitioning

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 11, 2004, 12:42
Default MeTis Partitioning
Posts: n/a
Hello All, I am trying to use Metis to partition and assign memory for a run. I made a *.ccl file thus: EXECUTION CONTROL: PARTITIONER STEP CONTROL :

Runtime Priority = Standard


MeTis Type = k-way

Option = MeTis

Partition weight Factores = 4.0, 4.0, 2 END END END

Then I issued for the solver I issued cfx5solve -def test.def -par part 3 -ccl part.ccl -par -dist master, slave1, slave2

However I got error messages for both the *.ccl and the solver run instructions. I will apprecaite if any one can kindly correct me. I am running cfx5.6 Thanks.
  Reply With Quote

Old   April 12, 2004, 18:49
Default Re: MeTis Partitioning
Glenn Horrocks
Posts: n/a
Hi sola,

Have you tried setting Metis partitioning in the command line rather than the ccl file?

Regards, Glenn
  Reply With Quote

Old   April 13, 2004, 06:10
Default Re: MeTis Partitioning
Posts: n/a
Glenn, I am not sure I understand what you mean in the 'command line' by your response to Sola, do you mean when starting the solver ? Please clarify, as I am also having the same problem
  Reply With Quote

Old   April 13, 2004, 12:41
Default Re: MeTis Partitioning
Gloria Gaynor
Posts: n/a
cfx5solve -def test.def -part 3 -ccl part.ccl -par-dist master, slave1, slave2
It should work now.
  Reply With Quote

Old   April 13, 2004, 18:22
Default Re: MeTis Partitioning
Glenn Horrocks
Posts: n/a
Hi Meri,

You can start the solver either from the Solver Manager or directly from the command line. Starting from the command line is useful when you are putting CFX runs into a script for unattended running of multiple jobs.

Note Gloria's post, it contains the corrected command line to run it. I think the error was in the -par-dist option, there is no space between the -par and the -dist bit.

regards, Glenn
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
metis decompose OpenFoam 2.0.0 sebastianweiper OpenFOAM Installation 9 June 9, 2012 12:04
How to partition EDGES by using METIS AlbertoVe Main CFD Forum 0 August 18, 2010 17:43
Problem with Partitioners (METIS) Partition ANSYS Meshing & Geometry 1 January 1, 2010 14:53
air bubble is disappear increasing time using vof xujjun CFX 9 June 9, 2009 07:59
Node numbering at interface in MeTiS. mehul FLUENT 0 December 19, 2006 11:22

All times are GMT -4. The time now is 20:54.