CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   How to write CCL 2 computers (https://www.cfd-online.com/Forums/cfx/20332-how-write-ccl-2-computers.html)

Kemi May 1, 2004 14:39

How to write CCL 2 computers
 
Hello I wish to write a ccl to proportion memory b/w 2 computers for CFX5.6, 1 Computer has 2Gb and another has 750Mb, I need a ccl to ratio the memory. I need help urgently since I can not do any simulations, I keep getting error message not enough memeory. Thanks

Glenn Horrocks May 3, 2004 19:09

Re: How to write CCL 2 computers
 
Hi Kemi,

It is not normal to change the partition weightings by using ccl. Most people do it either using the Solver Manager or the command line (when starting the solver from batch mode).

But if you really want to set the partition weights in the ccl file then start a run from the solver manager with different partition weights and have a look at the ccl in the output file it produces. That will show you the format of how to set it up.

Glenn


All times are GMT -4. The time now is 07:18.