CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Insuficient catalogue size

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 11, 2004, 13:00
Default Insuficient catalogue size
  #1
pi
Guest
 
Posts: n/a
Hello everybody,

Iīve ask this question before but nobody answered. Please, if someone got this problem before answer this message. +--------------------------------------------------------------------+ | | | *** INSUFFICIENT CATALOGUE SIZE *** | | | | Action required : Increase the file catalogue size. | | | | If the situation persists please contact the CFX Customer Helpline | | giving the following details:- | | | | Current catalogue size: 37518 | | | +--------------------------------------------------------------------+

It is shown after a few iterations in a multiphase run with 800000 elements. What do I have to do to increase the catalogue size? and what is this?. In the CFX manuals donīt say a word of it.

Thanks in advance for your help

pi
  Reply With Quote

Old   May 12, 2004, 08:51
Default Re: Insuficient catalogue size
  #2
Johnson
Guest
 
Posts: n/a
Hi

Try extending the catalogue size by adding the following parameter to the SOLVER CONTROL section of the CCL:

Catalogue Size Multiplier = x

where x is some value (e.g. 1.4) to multiply the default catalogue size.

Johnson
  Reply With Quote

Old   May 13, 2004, 10:24
Default Re: Insuficient catalogue size
  #3
pi
Guest
 
Posts: n/a
Hi Johnson,

right after to post the message I took a glance to the old messages and I found the answer to my question. Itīs just the same that yours. There is no information about this in the manuals.

thanks anyway

pi
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 06:36
critical error during installation of openfoam Fabio88 OpenFOAM Installation 21 June 2, 2010 03:01
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
Phase locked average in run time panara OpenFOAM 2 February 20, 2008 15:37
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 10:42.