CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

concentration in a room

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 17, 2004, 04:49
Default concentration in a room
  #1
Tad
Guest
 
Posts: n/a
Hello all

I am trying to map the concentration decay in a ventilated room by using CO2 as a tracer gas. I inject the tracer using user fortran and got values of the tracer in the room. CFX manual says the unit of the user fortran is kg/s. How can I changed it to concentration unit, say kgCO2/kg air? help is appreciated!! thanks. I use CFX 4.4

Tad

  Reply With Quote

Old   June 17, 2004, 23:47
Default Re: concentration in a room
  #2
Jeff
Guest
 
Posts: n/a
Sources on mass fractions are in kg/s, but the actual concentration value for a mass fraction is always kg species / kg fluid (i.e. mass fraction).

Jeff
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] Object in room with that object being the purpose of investigation fluentgambituser ANSYS Meshing & Geometry 3 August 24, 2011 02:52
Hydrogen concentration inside the battery room mazhar1613 ANSYS 0 August 15, 2011 03:31
Salome and Code Saturne simulation of simple room and objects cristian.ocnarescu Main CFD Forum 0 June 21, 2010 11:19
initial concentration in multicomponent mixtures isidro Siemens 0 April 26, 2004 08:40
simulate the contamnate concentration in a room jejuneye FLUENT 2 July 28, 2003 04:43


All times are GMT -4. The time now is 15:09.