CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   About Icem cfd4.cfx (http://www.cfd-online.com/Forums/cfx/20449-about-icem-cfd4-cfx.html)

amphibian June 21, 2004 09:16

About Icem cfd4.cfx
 
I use Icem cfd4.cfx to bulid geometry and mesh. How can I import the mesh to cfx5.7? Thanks!

derrek June 21, 2004 18:15

Re: About Icem cfd4.cfx
 
Go to output and select cfx5 as the solver. You can give the file a name when prompted. In CFX Pre, choose ICEM as the input and search for the file.

Derrek

amphibian June 22, 2004 05:38

Re: About Icem cfd4.cfx
 
But the cfxpre has error as your mehtod

KKA June 30, 2004 16:48

Re: About Icem cfd4.cfx
 
hey buddy

those steps are correct. if the problem still persit, then make sure that everything is all right from the ICEM. The domain is probably set. During the export to CFX, make sure that you select appropriate version of the CFX5. Check your version and then select it but if you using CFX5.7 then just select 5.5 or later!!!

all the best!!


All times are GMT -4. The time now is 02:48.