A modeling problem of flow in a tube -- CFD Online Discussion Forums

July 21, 2004, 15:29	A modeling problem of flow in a tube	#1
Jason Guest Posts: n/a	Hi, I am getting started with CFX5.7 using CAD2Mesh. The constant area tube is open on one side, closed on the other. A small part(1/10) of the tube near the closed side is filled with this high pressure air, which travels to the open side at time 0. (it's like a very thin plate holding the high pressure air and then been removed very quickly) In CFX5.7, how do I model this high pressure region? Thanks!

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Complex problem: Open Channel Flow	lett	FLUENT	18	November 10, 2018 18:30
problem in modeling flow over a 3d airfoil	guess	Main CFD Forum	8	March 20, 2010 13:54
A problem: reversed flow in ... on outflow.	vandadt	FLUENT	10	November 10, 2009 16:40
Flow not moving - Supersonic/Initial Pressure problem?	shankara.2	FLUENT	0	June 9, 2009 20:49
Problem on boundry of two phase flow	youngan	CFX	0	June 30, 2003 02:32

All times are GMT -4. The time now is 00:47.