CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

A beginner's problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 9, 2004, 06:45
Default A beginner's problem
  #1
lingo
Guest
 
Posts: n/a
Hi,friends:

I began to use cfx5.6 several days ago.I practise According to the tutorial.However,when I set some parameters in panel ,I cann't find the last buttons such as "apply"or "finish",so I had to quit. For example,when I set-mesh parameter-angular revolution or creat-infalted boundary,I cann't see the "apply".I try to solve it with amplifying or adjust the resolution ratio,but don't work.

Could you give me any suggestion?Excuse me for my poor expression.

Regards lingo
  Reply With Quote

Old   August 9, 2004, 07:20
Default Re: A beginner's problem
  #2
Meri
Guest
 
Posts: n/a
Lingo, What OS are you using ? In Linux, sometimes you have to adjust the screen and font sizes and I think it is the same under windows. Don't get discouraged, read the introductory manual, there is a way to resize everything so it fits your screen
  Reply With Quote

Old   August 9, 2004, 11:42
Default Re: A beginner's problem
  #3
Yuan
Guest
 
Posts: n/a
Lingo,

I met the same problem as you before. All the unseen buttoms (the lower part of the panel) are covered by the main interface of CFX. You can just enlarge the main to full screen so that enough area can be set aside for your current using panel. Good luck.
  Reply With Quote

Old   August 10, 2004, 03:01
Default Re: A beginner's problem
  #4
lingo
Guest
 
Posts: n/a
Meri,Yuan:

You are right.I solve it.Thank you very much! lingo
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with interFoam; Wave/wiggle alpha1 behavior JonW OpenFOAM 10 February 4, 2023 08:27
Problem in implementing cht tilek CFX 3 May 8, 2011 09:39
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 20:13
Beginners problem Zurayk CFX 4 January 11, 2007 10:56
Is this problem well posed? Thomas P. Abraham Main CFD Forum 5 September 8, 1999 15:52


All times are GMT -4. The time now is 16:33.