 |
 |
 |
|
|
|
[Sponsors] | ||||
August 18, 2004, 12:00
|
Hexa to CFX4 geo file
|
#1 |
|
Guest
Posts: n/a
|
Hi
Is it possible to generate a CFX4 compatible geometry or a *.geo file using Hexa Mesh in ICEM CFD4.CFX? If so, could anyone elaborate how? Cheers, Prash |
|
|
||
|
August 18, 2004, 18:23
|
Re: Hexa to CFX4 geo file
|
#2 |
|
Guest
Posts: n/a
|
Hi Prash,
In the current version of CAD2MESH ICEM (version 5) it is. Glenn |
|
|
|
||
|
August 19, 2004, 04:01
|
Re: Hexa to CFX4 geo file
|
#3 |
|
Guest
Posts: n/a
|
Many thanks Glenn for the advice. Do you mean the ANSYS ICEM CFD Release 5.0 version by this? Does it mean that we can't generate the CFX4 *.geo file from the ICEM CFD 4.0?
Cheers, Prash |
|
|
|
||
|
August 19, 2004, 18:25
|
Re: Hexa to CFX4 geo file
|
#4 |
|
Guest
Posts: n/a
|
Hi Prash,
You are correct. ANSYS ICEM CFD Release 5.0 can generate CFX4 geo files but ICEM CFD 4.CFX cannot. Glenn |
|
|
|
||
|
August 20, 2004, 03:25
|
Re: Hexa to CFX4 geo file
|
#5 |
|
Guest
Posts: n/a
|
Many thanks once again, Glenn!
Cheers, Prash |
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh | gschaider | OpenFOAM Community Contributions | 300 | October 29, 2014 18:00 |
| Working directory via command line | Luiz | CFX | 4 | March 6, 2011 20:02 |
| OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3 | flakid | OpenFOAM Installation | 16 | December 28, 2010 08:48 |
| [blockMesh] BlockMesh FOAM warning | gaottino | OpenFOAM Meshing & Mesh Conversion | 7 | July 19, 2010 14:11 |
| OpenFOAM on MinGW crosscompiler hosted on Linux | allenzhao | OpenFOAM Installation | 127 | January 30, 2009 19:08 |
Linear Mode
