CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Ansys question

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 23, 2004, 10:11
Default Ansys question
  #1
Dominik Bell
Guest
 
Posts: n/a
Dear Friends, Could someone please help me with the following question about the Ansys software? I am currently modeling a micro part, which is a tube formed by a rolled-up sheet. When I apply a vertical load in the centre of the tube, the resulting deformation is not realistic. The sheet inside goes through the sheet outside. In fact, I think the problem arises earlier after meshing of the part. Since the element size is constant but the radius gets smaller along the rolled-up cross-section, there is some overlap of elements after meshing. Can you please let me know how to solve this problem. Thank you very much
  Reply With Quote

Old   August 25, 2004, 23:39
Default Re: Ansys question
  #2
Jeff
Guest
 
Posts: n/a
Wrong forum.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unanswered question niklas OpenFOAM 2 July 31, 2013 16:03
FSI, Fluent Ansys coupling Greg Carnie FLUENT 5 January 7, 2010 20:15
ANSYS to acquire CFX Fred CD-adapco 0 February 18, 2003 22:03
problem in reading ansys file satya bulusu CD-adapco 3 November 27, 2002 04:29
question K.L.Huang CD-adapco 1 March 29, 2000 04:57


All times are GMT -4. The time now is 21:04.