|
[Sponsors] |
September 28, 2004, 10:20 |
CFX post-processor error!
|
#1 |
Guest
Posts: n/a
|
I have the referent problem:
when creating isosurfaces, sometimes the post-processor are closed and the follow message appears: ================================================== == CFX-5.7 (C) 1996-2004 CFX Ltd. All rights reserved. signal 11 was caught: segmentation violation Socket::sockWarning! CFX-POST exited with return code 1 etRecv: Socket error in read: recv: connection reset comm::error: GUIInterface::waitInput - The return code from CUEProtocol is empty . Engine state was dumped to C:/Documents and Settings/newmar/.cfx/cfxpost/dump.cs t Socket::socketRecv: Socket error in read: recv: connection reset ================================================== == There is some solution for this problem? Thanks, Carlos Newmar |
|
September 28, 2004, 18:25 |
Re: CFX post-processor error!
|
#2 |
Guest
Posts: n/a
|
Hi Carlos,
You have crashed the post processor. It might be a bug in the software or a problem with your setup. I would report it to your CFX rep. Glenn Horrocks |
|
September 29, 2004, 00:35 |
Re: CFX post-processor error!
|
#3 |
Guest
Posts: n/a
|
I have such experience many times. For all users I have installed Detonator 44.71 (I found this works - we have NVidia graphic boards, but not Quadro). This is graphic drivers problem. I have found that any drivers,that I tested, greater than 50.00 cause such problems.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to get reynolds stress values in POST CFX | syler3321 | CFX | 6 | January 1, 2017 07:54 |
CFX post legend modification | mactech001 | CFX | 3 | December 25, 2011 22:12 |
CFX post - graph | kmgraju | CFX | 0 | July 22, 2010 11:59 |
Chart Generation in CFX Post | Vadim Baines-Jones | CFX | 2 | August 28, 2007 09:14 |
Tecplot for CFX post processing | pantangi goud | CFX | 2 | August 24, 2005 16:42 |