CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Solver was interupted by signal TERM(15). (http://www.cfd-online.com/Forums/cfx/20682-solver-interupted-signal-term-15-a.html)

Tony September 30, 2004 15:58

Solver was interupted by signal TERM(15).
 
The error massage is:

The CFX-5 solver was interupted by signal TERM(15). No results file has been created.

Recently I had this massage twice, anyone knows what it means?

Thanks.

Juan Carlos September 30, 2004 16:42

Re: Solver was interupted by signal TERM(15).
 
That one is known as a "software termination signal." What operating system are you running on.. Is it AIX by any chance?

Juan Carlos

Tony September 30, 2004 20:14

Re: Solver was interupted by signal TERM(15).
 
Thanks, Carlos. I am not sure about the AIX you mentioned. I remotely run it on the Linux cluster of our university's supercomputer center from my SUN station machine.

deLuther October 1, 2004 04:35

Re: Solver was interupted by signal TERM(15).
 
As I remember it can be caused by user logoff... i.e. you close console. Maybe you need run your job in background. SolverManager automatically launches task in background, but from console you need & after command. But maybe I am wrong, because at least 5.7 writes error message "because user logoff". But 5.6...maybe not.

Tony October 1, 2004 16:39

Re: Solver was interupted by signal TERM(15).
 
Thanks, That explains this.


All times are GMT -4. The time now is 23:04.