CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

A question about CFX-Post

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 18, 2004, 22:46
Default A question about CFX-Post
  #1
akang
Guest
 
Posts: n/a
Hi,all When I want to get the force acting on the walls caused by air and water separately, I get the same force value in fluid: All Fluids/Air at 25C/Water at 25C.So does anyone explain it?
  Reply With Quote

Old   October 19, 2004, 11:49
Default Re: A question about CFX-Post
  #2
KKA
Guest
 
Posts: n/a
Hi Akang

Cross check well that you used specific fluid. You can also manually calculate it at a point to check it with the CFX result. This can be done using the Calculator command or any other means!

Check the CFX Manual too to see if the formular for computing the force is same as what you're looking for.

Regards
  Reply With Quote

Old   October 20, 2004, 23:08
Default Re: A question about CFX-Post
  #3
akang
Guest
 
Posts: n/a
Thanks a lot! I'll try!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Transient animation performance in CFX 5.5 POST Sjoerd Romkes CFX 8 February 5, 2013 15:53
BladeGen and CFX - basic question Dip CFX 5 August 5, 2010 17:21
CFX 11, post Anant CFX 1 June 24, 2008 11:03
A question about .eps images using CFX5.6 post Forrest CFX 6 June 18, 2004 03:24
Radiation/Heat Flux in CFX Post Soren CFX 1 July 2, 2002 12:55


All times are GMT -4. The time now is 16:13.